Use a mild soap and water solution to clean the area where the decals will be applied. Dry the surface thoroughly with a soft cloth or paper towels.

Place the decal (with the transfer tape still on) against the surface to determine the exact position. Use masking tape to hold the decal in place if needed.

Carefully peel the backing paper away from the decal, ensuring the decal stays attached to the transfer tape. Position the decal on the desired location.

Use a squeegee or credit card to firmly press the decal onto the surface. Start from the center and work outwards to remove any air bubbles and ensure a smooth application.

Slowly peel away the transfer tape, making sure the decal stays adhered to the surface. If any part of the decal lifts, press it back down and smooth it out with the squeegee or credit card.

Look for any air bubbles and smooth them out by pressing with the squeegee or credit card.

Apply the decals in a shaded area or indoors to avoid direct sunlight. Ensure the surface temperature is between 50°F and 90°F (10°C and 32°C) for best results.